Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

基于状态变换的数字电路冗余确认研究

以状态跳变图为基础,深入分析了冗余变换与非法变换的特征,提出结构冗余和功能冗余的概念,并讨论了可测故障、不可测故障和冗余之间的联系.最后结合验证和测试生成,提出状态冗余的隐含遍历确认策略.     

压水型核反应堆功率控制系统的优化设计

在分析了压水型反应堆功率控制系统的前提下,针对其特殊的控制要求,运用基于输出反馈的次最优控制的设计方法和Matlab中的NCD模块,最终实现了系统的优化设计,并对系统进行了某一功率水平下的仿真试验和其它工况下的鲁棒性试验.结果表明,改进后的系统性能有了较大改善.     

基于遗传算法的观察所优化配置

文章研究了三维地形中的观察所优化配置问题,结合观察所实际情况,给出了利用遗传算法进行观察所优化的计算方法,并编制了计算机应用程序.计算机模拟实验表明,文中采用的算法能综合考虑多种因素,所得结果合理、准确,并且具有较高的效率.     

Attrition through a partially coordinated area defense

An area defense consists of several groups that act independently, i.e., do not communicate with each other. Each group has a fixed number of defenders and a controller that allocates these defenders optimally against the individual attackers comprising an attack. We analyze the effectiveness of this partially coordinated defense against a simultaneous attack of known size in which all attackers are considered to be equally lethal. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

坦克动力舱空气流动计算区域的网格生成

为了合理解决网格划分对坦克动力舱空气流动与传热三维数值计算效率和计算精度的影响,特提出动力舱空气流动计算区域的网格生成方法.对某型坦克动力舱的网格生成实例,显示了这种方法的实用性.     

舰船航向保持的变结构控制及仿真

运用变结构控制理论和计算机仿真技术研究舰船航向保持过程的变结构控制问题,针对舰船定向航行要求航向准、舵角小的控制特点,采用二次型最优控制方法设计滑动模态超平面,设计了满足滑模超平面到达条件的指数趋近律,导出了对应的控制律。同时,为进行比较研究,设计了PID控制器并整定了相关参数。理论分析与仿真研究表明:对于舰船定向航行,变结构控制方案正确可行,控制效果优于PID控制方案。     

星空点源背景红外辐射场景生成模型

星空场景建模是空间目标识别与跟踪的关键技术之一.基于中段空间实验红外天文星表(MSX-IRAC),通过位置计算得到该星表内恒星在指定观测时刻、观测地点投影到视场所在平面的坐标,同时利用改进的光谱模板技术,生成视场内所有点源星体的红外光谱(1.2～35 μm),并对光谱积分得到指定谱段的辐射量,最后将恒星位置和辐射信息在二维图像上表现出来,从而实现了一个星空点源背景红外辐射场景生成模型,并通过实例仿真验证了该模型的正确性.     

陆军战术作战仿真想定生成方法

针对作战仿真中想定数据的生成需求,在分析仿真想定内容的基础上,规范了仿真想定的生成流程,给出了指挥规则的抽取和量化方式,提出了面向实体的仿真想定结构化表示方法和基于XML的仿真想定存储结构,分析了利用G IS和3D技术实现作战计划和行动协同规划的方法途径,探讨了仿真想定数据的校核内容和重用机制,为实现仿真想定生成工具提供了一种有效的思路。     

新疆高等教育资源配置的现状及问题研究

高等教育资源的合理配置是提高高校办学质量和效益的前提和关键。本文通过梳理新疆高等教育资源配置现状及存在的具体问题,进一步提出优化高等教育资源配置的对策建议,以期充分发挥高等教育在新疆社会发展中的巨大作用。